atf16v8cz Datasheet - Atmel
The ATF16V8CZ is a high-performance, electrically erasable, programmable logic device (PLD) from Atmel.
📖 Datasheet Preview
⬇️ Download Complete Datasheet
Get the full 10-page technical datasheet in PDF format
📝 Component Overview
The ATF16V8CZ is a high-performance, electrically erasable, programmable logic device (PLD) from Atmel. It belongs to the ATmega and AVR family of microcontrollers but is specifically designed for programmable logic applications. The device features 16 macrocells, each capable of implementing either a combinatorial or sequential logic function. The ATF16V8CZ is suitable for a wide range of applications, including glue logic, interface controller, and state machine implementation.
Key Features and Benefits
- High-performance, electrically erasable PLD
- 16 macrocells for implementing combinatorial or sequential logic functions
- Programmable using a variety of algorithms and tools
- Suitable for glue logic, interface controller, and state machine applications
- Available in various packages including PDIP, PLCC, and SOIC
- Operating voltage range: 4.5V to 5.5V
- High-speed operation with clock frequencies up to 100 MHz
Typical Applications
- Glue logic and interface control
- State machine implementation
- Digital control systems
- Communication protocol controllers
- Industrial control systems
- Medical devices
- Consumer electronics
📊 Complete Technical Specifications
Absolute Maximum Ratings
| Parameter | Value |
|---|---|
| Operating Temperature | -40°C to +85°C |
| Storage Temperature | -65°C to +150°C |
| Voltage on Any Pin | -0.5V to VCC + 0.5V |
Electrical Characteristics
| Parameter | Condition | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| ICC (Standby) | VCC = 5V, TA = 25°C | 1 | 5 | 10 | mA |
| IOH (Output High Current) | VCC = 5V, VOH = 4.5V | -8 | -12 | -16 | mA |
Package Information
- PDIP (20-pin): Plastic Dual In-Line Package
- PLCC (20-pin): Plastic Leaded Chip Carrier
- SOIC (20-pin): Small Outline Integrated Circuit
Pin Configuration
- Pin 1: VCC - Positive Power Supply
- Pin 2: GND - Ground
🔧 Application Guidelines
Design Considerations
When designing with the ATF16V8CZ, consider the operating voltage range, clock frequency, and the specific logic functions required by the application. Ensure that the device is programmed correctly using the appropriate tools and algorithms.
Installation Guidelines
The ATF16V8CZ should be handled with care to prevent damage from static electricity. Mount the device on a printed circuit board (PCB) with the correct package type and ensure all pins are securely connected to the appropriate signals.
Operational Notes
The ATF16V8CZ operates within a specified temperature range and voltage supply. Ensure that the device does not exceed these ratings during operation. Regularly review the device's datasheet for any updates or revisions to the specifications or application guidelines.