atf16v8c Datasheet - Atmel
The ATF16V8C is a high-performance, electrically-erasable, programmable logic device (PLD) from Atmel.
📖 Datasheet Preview
📄 + 1 more pages available - Download the full PDF to see complete datasheet
⬇️ Download Complete Datasheet
Get the full 16-page technical datasheet in PDF format
📝 Component Overview
The ATF16V8C is a high-performance, electrically-erasable, programmable logic device (PLD) from Atmel. It belongs to the ATmega and AVR family of microcontrollers but specifically is categorized under Programmable Logic Devices (PLDs). This device is designed for use in a wide range of applications, including control systems, interface circuits, and logic functions. The ATF16V8C features 16 macrocells, each capable of implementing either a combinatorial or sequential logic function.
Key Features and Benefits
- High-performance, electrically-erasable PLD
- 16 macrocells for implementing logic functions
- Combinatorial or sequential logic capability
- Electrically erasable for easy reprogramming
- Wide operating temperature range
- Low power consumption
- High-speed operation
- Pin-to-pin compatible with other devices in the family
- Supports various programming algorithms and interfaces
Typical Applications
- Control systems
- Interface circuits
- Logic functions
- Industrial control
- Medical devices
- Telecommunications equipment
- Consumer electronics
- Automotive systems
- Aerospace applications
📊 Complete Technical Specifications
Absolute Maximum Ratings
| Parameter | Value |
|---|---|
| Operating Temperature | -40°C to +85°C |
| Storage Temperature | -65°C to +150°C |
| Voltage on Any Pin | -0.5V to VCC + 0.5V |
Electrical Characteristics
| Parameter | Condition | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| ICC (Standby) | VCC = 5V, TA = 25°C | 1 | 5 | 10 | mA |
| IOH (Output High Current) | VCC = 5V, TA = 25°C | -0.4 | -1 | -2 | mA |
Package Information
- 20-pin DIP: Dual In-Line Package
- PLCC: Plastic Leaded Chip Carrier
- TSSOP: Thin Shrink Small Outline Package
Pin Configuration
- Pin 1: VCC - Positive Power Supply
- Pin 2: GND - Ground
🔧 Application Guidelines
Design Considerations
When designing with the ATF16V8C, consider the operating voltage, temperature range, and the specific logic requirements of your application. Ensure that the device is properly powered and that all inputs and outputs are within the specified voltage ranges.
Installation Guidelines
The ATF16V8C should be handled with care to prevent damage from static electricity. Use an anti-static wrist strap or work mat when handling the device. Ensure the device is properly seated in its socket or soldered to the PCB, following standard soldering practices.
Operational Notes
The ATF16V8C is a programmable device. Before use, it must be programmed with the desired logic function using a programmer compatible with Atmel devices. Follow the programming guidelines provided by Atmel for successful programming.