ad2710 Datasheet - Analogdevices
The AD2710 is a high-speed, low-power analog-to-digital converter (ADC) from Analog Devices.
📖 Datasheet Preview
⬇️ Download Complete Datasheet
Get the full 4-page technical datasheet in PDF format
📝 Component Overview
The AD2710 is a high-speed, low-power analog-to-digital converter (ADC) from Analog Devices. It features a 10-bit resolution and a sampling rate of up to 100 MSPS, making it suitable for a wide range of applications, including medical imaging, industrial control, and communications systems. The device operates from a single 5V supply and consumes typically 140mW at 100MSPS. It is available in a 28-lead SSOP package.
Key Features and Benefits
- 10-bit resolution
- Up to 100MSPS sampling rate
- Low power consumption: 140mW at 100MSPS
- Single 5V supply
- 28-lead SSOP package
- High-speed, low-power ADC
- Suitable for medical imaging, industrial control, and communications systems
Typical Applications
- Medical imaging
- Industrial control
- Communications systems
- Data acquisition systems
- Medical devices
- Test and measurement equipment
📊 Complete Technical Specifications
Absolute Maximum Ratings
| Parameter | Value |
|---|---|
| Supply Voltage | 5.5V |
| Operating Temperature | -40°C to +85°C |
| Storage Temperature | -65°C to +150°C |
Electrical Characteristics
| Parameter | Condition | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Resolution | Typical | 10 bits | 10 bits | 10 bits | bits |
| Sampling Rate | Typical | 10MSPS | 100MSPS | 100MSPS | MSPS |
Package Information
- 28-lead SSOP: Small Outline Package with 28 leads
Pin Configuration
- Pin 1: VCC - Positive supply voltage
- Pin 2: GND - Ground
🔧 Application Guidelines
Design Considerations
When designing with the AD2710, consider the high-speed sampling rate and the low power consumption. The device requires a single 5V supply and can operate over a wide temperature range. Proper layout and decoupling are essential for optimal performance.
Installation Guidelines
The AD2710 is available in a 28-lead SSOP package. It is recommended to follow standard SMT assembly procedures for mounting the device. Ensure proper thermal management and consider using a heat sink if necessary.
Operational Notes
The AD2710 is a high-speed device and requires careful attention to signal integrity and noise reduction. Use proper shielding and filtering techniques to minimize noise and ensure reliable operation.